R&S®SMB100B RF Signal Generator

Key facts

  1. Frequency range from 8 kHz to 1 GHz, 3 GHz or 6 GHz
  2. Outstanding single sideband (SSB) phase noise of < –134 dBc (meas.) at 1 GHz and an offset of 20 kHz
  3. Very low wideband noise of < –153 dBc (typ.) at 15 MHz < f ≤ 6 GHz and an offset of 30 MHz
  4. Ultra high output power of 34 dBm (meas.) at 1 GHz
  5. Compact form factor with 2 HU and ¾ 19″ width

R&S®SMC100A Signal Generator

Smallest size and best price/performance ratio in its class

Key facts

  1. Frequency range 9 kHz to 1.1 GHz or 3.2 GHz
  2. Maximum output level of typ. > +17 dBm
  3. Optional high-stability reference oscillator
  4. Analog modulation modes (AM/FM/φM/pulse) integrated as standard
  5. Integrated overvoltage protection
  6. Wear-free electronic attenuator
  7. Minimized total cost of ownership

HMF2525/HMF2550 Arbitrary Function Generator

Key facts

  1. Frequency range: 10 μHz to 25/50 MHz
  2. Triangle waveforms up to 10 MHz
  3. Output voltage: 5 mV to 10 V (Vpp) (into 50 Ω)
  4. Total harmonic distortion of 0.04 % (f < 100 kHz)
  5. Waveforms: sine, square, triangle/ramp, pulse, arbitrary (incl. predefined waveforms such as white/pink noise, cardinal sine, exponential rise/fall)
  6. Modulation modes: AM, FM, pulse, PWM, FSK (internal and external)
  7. External connectors: TRIGGER (I/O), SWEEP (O), MODULATION (I)
  8. External reference input/output (10  MHz) via BNC connector
  9. Arbitrary waveform generator: 250 Msample/s, 14  bit, 256  kpoint
  10. PC software (free of charge) to easily create user-defined waveforms
  11. Oscillographic signal display in realtime
  12. Front USB connector to easily save and recall waveforms and settings
  13. USB/RS-232 dual interface for remote control
  14. Fanless design