Signal & Spectrum Analysers

R&SEDS300 DME/Pulse Analyzer

High-precision measurement of DME and TACAN systems on the ground and in the air (in line with ICAODoc.8071,ICAO Annex 10, STANAG 5034 and MIL-STD-291C)
Total peak level deviation < 1 dB
Receiver aquisition sensitivity 97 dBm
01 NM distance measurement uncertainty down to ?80 dBm
2? TACAN bearing deviation for input levels 80 dBm
Detailed automated pulse shape analysis
Multi-DME mode for measuring up to ten DME stations quasi-simultaneously, i.e. within 50 ms (R&SEDS-K5)
Synchronization via GPS, trigger and remote interfaces

Precise, reproducible analyses on ILS, VOR and marker beacon ground systems (in line with ICAO Doc 8071 and ICAO Annex 10)
High measurement rate, at 100?data records/s
Analysis of air traffic control communications (ATC COM) signals
High sensitivity for coverage measurements
Compact, robust design
Two identical signal processing units for simultaneous localizer and glidepath measurements

High-precision analysis of ILS, VOR and marker beacon ground systems (in line with ICAO Doc 8071 and ICAO Annex 10)
Analysis of air traffic control communications (ATC COM) signals
High dynamic range of > 130 dB, precise level and modulation depth measurements
Spectrum preview and detailed analysis options in the frequency and time domain
Extremely compact, with integratable battery
Dynamic measurements at up to 100 data records/s in high measurement rate mode
Simultaneous analysis of course and clearance signals on dual-frequency (2F) ILS systems

Frequency range up to 3 GHz or 4 GHz, upgrade via keycode
One-port model features: DTF, return loss, VSWR and cable loss measurements
Two-port model additionally features S21measurements, spectrum and interference analysis, AM/FM/ASK/FSK demodulation
Ideal for field use: up to 9-hour battery life, 2.5 kg (5.5 lb), backlit keypad, fast boot time, non-reflective display, small form factor, ruggedized housing (IP51)

Frequency range from 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40GHz
40 MHz real-time analysis bandwidth for:
- Spectrum with persistence function
- Spectrogram display
- Display of power versus time
Triggering on frequency masks
Measurement applications for cellular standards, wireless connectivity standards and general purpose, e.g. phase noise, noise figure, vector signal analysis, etc.
Frequency range up to 110 GHz with the R&S FSVR30 or R&S FSVR40, the R&S FSV-B21 option and the R&S?FS-Z60/-Z75/-Z90/-Z110 harmonics mixers

Frequency range from 20 Hz to 3/26.5/43/50 GHz
Highly accurate level calibrator with wide measurement range from +30 dBm to ?140 dBm
Highly accurate level calibrator
Modulation analyser
Audio analyzer with THD and SINAD measurement functionality
Power meter for connection of R&S NRP-Zxx power sensors
High-performance spectrum analyser

Signal and spectrum analyzer and phase noise analyzer in a single box
High end signal and spectrum analyzer, 10[nbsp]]Hz to 8/26.5/50?GHz
Wide dynamic range thanks to low displayed average noise level (DANL) of 156?dBm (1?Hz) (without noise cancellation) and high TOI of typ. 25 dBm
320 MHz signal analysis bandwidth
Total measurement uncertainty: < 0.2 dB up to 3.6 GHz,< 0.3 dB up to 8 GHz
Touchscreen operation
Large 12.1″ display for simultaneous viewing of multiple measurement windows
Various measurement applications can be run and displayed in parallel

High-precision TX/RX measurements on TACAN and DME systems (in line with ICAO Annex 10, ICAO Doc. 8071, MIL STD 291C and STANAG 5034)
All required measurements with a single instrument
High dynamic range (110 dB) and precise peak power measurements
Precise, efficient measurement of characteristic TACAN/ DME parameters (main delay < 50 ns, bearing < 0.2)
Detailed, automated time domain analysis
Extremely compact with internal battery